Asante EtherPaC 2000+ Series Guide d'installation télécharger pdf (Page 27)

3-4 Booting up the PC from a Server

Preparing the network server

Create an

AUTOEXEC.NCF ﬁle on the server.

The ﬁle below is an example of an AUTOEXEC.NCF ﬁle.

FILE SERVER NAME

SERVER_GREEN

IPX INTERNAL NET

LOAD NE2000 PORT=

300

INT=

FRAME=ETHERNET_802.3 NAME=DOT3

LOAD NE2000 PORT=

300

INT=

FRAME=ETHERNET_802.3 NAME=DOT2

LOAD RPL

BIND IPX TO DOT3 NET=

100

BIND IPX TO DOT2 NET=

200

BIND RPL TO DOT2

The values in this ﬁle are examples only. Use the values that

apply to your network.

The \LOGIN directory must have:

NET$DOS.SYS generated by DOSGEN.EXE,

“patched” by RPLFIX.EXE

RBOOT.RPL Novell ﬁle

The \SYSTEM directory must have:

RPL.NLM Novell Netware loadable module for

remote program load

DOSGEN.EXE used to generate NET$DOS.SYS

RPLFIX.EXE used to “patch” NET$DOS.SYS

ﬁle server name

server interrupt

network number

port on NE2000

network number

1 2 ... 22 23 24 25 26 27 28 29 30 31 32

Pas de commentaire

Asante EtherPaC 2000+ Series Guide d'installation Page 27