Asante 10BaseT Guide d'installation télécharger pdf (Page 31)

Page 2-9

Interconnecting via the UTP Port

To interconnect multiple star networks using the UTP ports:

Use two, ISO 8877, 8-pin, modular jacks (RJ45) on a length of

twisted-pair wire (no longer than 100 meters) that is 24-gauge,

solid-conductor, unshielded twisted-pair.

Insert one jack into the IN port of one hub (e.g. , Port 9). Insert

the other jack into the OUT port of another hub.

Figure 2-5 Sample Network of Two 10T Hub Units

The two hubs are connected with a twisted-pair cable from the “OUT” port

of one hub to the “IN” port of the other hub.

Each workstation connected to the hubs requires an Ethernet adapter. A

10BaseT MAU can be used to convert an older Ethernet card which supports

thick cable to support twisted pair cable. In this diagram, the Macintosh

computers have an internal Ethernet card, such as the Asanté MacCon3

cards, and the PCs have a TP-MAU, such as the Asanté 10T MAU.

10T Hub Ch 2 Page 9 Thursday, August 22, 1996 4:25 PM

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 57 58

Pas de commentaire

Asante 10BaseT Guide d'installation Page 31