Asante EtherPaC 2000+ Series Guide d'installation télécharger pdf (Page 14)

2-4 Installing and Conﬁguring the Adapter

Gently press the card into the expansion slot until it is fully

seated.

Fasten the holding screw to ground the card to the chassis.

See Figure 2-3.

Figure 2-3

Inserting the adapter in an expansion slot

Replace the computer’s cover.

Connect the Ethernet cable to the adapter.

Make sure the PC is turned off and the cable’s metal con-

nectors do not touch any metal objects in the computer.

Follow the guidelines given below for your cable type:

With a 10BaseT cabling

Plug the cable’s RJ45 connector into the RJ45 jack on the

adapter and plug the other cable end into a 10BaseT net-

work hub. Be sure the cable between your computer and

the hub is not longer than 328 feet or 100 meters.

ch 2 Page 4 Monday, August 26, 1996 11:06 AM

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 31 32

Pas de commentaire

Asante EtherPaC 2000+ Series Guide d'installation Page 14