Asante EtherPaC 2000+ Series Guide d'installation télécharger pdf (Page 21)

Installing and Configuring the Adapter 2-11

Set the Turbo Mode to Enabled only if the adapter fails when

using the NE2000 mode due to an incompatibility between

the PC’s AT-bus and the adapter’s I/O Channel Ready signal

(I/O CHRDY).

This system message appears:

*** CAUTION ***

The Turbo Mode should be set to DISABLE (factory default

setting) for normal operation. You may ENABLE it only if the

adapter fails the Memory or RAM Test. Improper use of the

Turbo Mode may result in unpredictable system operation.

To save your changes, press

<F3>

and to return to the Main

Menu, press

<ESC>

To exit the Setup program, select

Exit to Operating System.

ch 2 Page 11 Monday, August 26, 1996 11:06 AM

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 31 32

Pas de commentaire

Asante EtherPaC 2000+ Series Guide d'installation Page 21